Government Schemes


Government Incentives

Under the UK Government’s domestic Renewable Heat Incentive (RHI) scheme, you could receive quarterly cash payments over seven years if you install or have already installed an eligible renewable heating technology.

What is the Renewable Heat Incentive (RHI)?

The Renewable Heat Incentive (RHI) is a UK Government scheme aiming to encourage uptake of renewable heat technologies amongst householders, communities and businesses through financial incentives, and contribute towards the 2020 ambition of 12% of heating coming from renewable sources.

The UK Government’s Department for Business, Energy & Industrial Strategy (BEIS) makes key policy decisions and energy regulator Ofgem E-Serve administers the scheme.

Policy documents are available on the UK Government website.
There are two versions of RHI: domestic, and non-domestic. This page provides information on the domestic RHI, but for details on the non-domestic RHI, you can visit Ofgem.

Domestic RHI scheme

The domestic RHI launched on 9 April 2014 and provides financial support to the owner of the renewable heating system for seven years. The scheme covers England, Wales and Scotland.
Ofgem have also published a document of case studies from the domestic RHI for further information.

Are you I eligible?

Further information about the domestic Renewable Heat Incentive is below. Please note that this is not an exhaustive list of criteria to apply for payments through the scheme. 

If you generate heat for your home via a renewable source, you may be eligible to apply. We have listed some of the key eligibility criteria below, but before applying, you should read the full requirements and rules of the scheme available Ofgem’s website.

What technologies are covered?

You should check before starting work whether the system you wish to install could be eligible for RHI payments.

We have given some information on eligibility criteria here – including additional requirements for biomass systems (below).  Further guidance on domestic RHI eligibility criteria can also be found on Ofgem’s site.

To be eligible for RHI payments all renewable technologies must be:

  • Listed as a Microgeneration Certification Scheme (MCS) certified product
  • Issued with a MCS certificate

The MCS site has full details of MCS certified products and MCS certified installers.

Technologies included are:

  • Biomass (wood fuelled) boilers*
  • Biomass pellet stoves with integrated boilers providing space heating*
  • Ground to water heat pumps
  • Air to water heat pumps
  • Solar thermal panels (flat plate or evacuated tube only) providing hot water for your home
  • Water source heat pumps can potentially be eligible for the Domestic RHI – they are included in the definition of a ground source heat pump.
  • Certain cooker stoves and high temperature heat pumps may also be eligible.

The domestic RHI does not support air to air heat pumps, log stoves, pellet stoves without back boilers and hybrid photovoltaic thermal hybrid solar collectors (PVT).

Additional requirements for biomass systems:
For a biomass system to be eligible for RHI payments you must also:

  • Have a RHI Emissions Certificate. You can check the RHI EC Listto see if a product is certified.
  • Use biomass fuel purchased from an approved sustainable wood fuel supplier*. Check UK Government’s Biomass Suppliers List(BSL) for registered supplier of biomass wood fuel meeting RHI requirements.

*It is advisable to check whether your fuel supplier is registered before entering into a long-term supply contract.  Not all fuels from BSL suppliers are sustainable as they may supply more than one type of fuel. You should check with your supplier, or prospective supplier, which of their fuels are registered.

Who can apply for RHI?

  • Owner-occupiers, self-builders, private landlords and registered providers of Social Housing who have installed an eligible technology can apply for RHI support (provided they meet eligibility criteria).
  • Single domestic dwellings are covered.
  • RHI support is not usually available to new build properties (other than self-build projects).

You must apply within one year of the commissioning date of your system.

Other considerations

There are limits on the amount of space heating a house can receive payments for. The heat demand limits are set at 20,000kWh for ASHPs, 25,000kWh for biomass boilers and stoves and 30,000kWh for GSHPs. There is no limit for solar water heating systems.

For heat pumps, if the deemed demand is more than the capped limit then you will be paid the unit tariff multiplied by the amount of renewable heat that contributes to the capped demand.

Please see the following guidance from Ofgem for more information about these changes, and full criteria for your system.

Changes to the scheme web page

Factsheet: Important changes to the Domestic RHI scheme

Factsheet: Introduction to assignment of rights

Factsheet: Essential guide to assignment of rights

If you have questions about an existing Domestic RHI application or a system already approved for Domestic RHI payments please contact Ofgem e-Serve, the scheme administrators, at 0300 003 0744 between 9:00am-5:00pm Monday-Friday or at

Assignment of Rights (AoR)

The introduction of “assignment of rights” (AoR) is an option to help householders and landlords access finance to overcome the barrier of the upfront cost of a renewable heating system.

Assignment of Rights (AoR) allows an “investor” to help fund the purchase, installation and maintenance of a household or landlord’s renewable heating system. Households and landlords are then able to assign their RHI payments to the investor, who is referred to in the RHI Regulations as the “nominated” investor. This came into effect on 27 June 2018.

What could I earn using RHI?

You will receive RHI cash payments quarterly over seven years. The amount you receive will depend on several factors, including the technology you install, the latest tariffs available for each technology and – in some cases – metering.

You can estimate how much money you could earn through RHI using the Department for Business, Energy and Industrial Strategy’s (BEIS) RHI payment calculator.

How do I apply for RHI?

The scheme will remain open to applications until 31 March 2022 and you can apply via Ofgem’s website. Providing you have all the relevant information to hand and your application doesn’t need to be manually reviewed, you should receive an immediate decision.

If you are unable to apply online, contact Ofgem’s Domestic RHI Applicant Support Centre on 0300 003 0744 Monday to Friday from 9am to 5pm or email:

If you received a grant from Government or public funds you will also need to provide details of:

  • The amount you were paid
  • The date you were paid
  • Figures regarding the cost of the installation

Please also note:

  • If you are applying for RHI for heat pumps you will also need the Seasonal Performance Factor (SPF)
  • If you are applying for RHI and your system requires metering, the Installer Metering Questions form will be to be submitted.


The table below summarises the latest tariffs available for each technology:

Tariff Graph

Table last updated June 2020

The table above is from information published from Ofgem. You can see the tariffs on their Domestic RHI tariffs and payments page. ​

These tariffs are set by the UK Government at a level designed to compensate for the difference between costs of installing and operating renewable heating systems and fossil fuel systems, including non-financial costs such as disruption, based on 20 years of heat produced. Fossil fuel costs used are those for off-gas households.

  • Ofgem will make payments on a quarterly basis for seven years. Normally the heat required to heat the property is deemed (estimated) and payments are based on this amount.
  • Biomass – renewable heat generated by biomass will be based on an estimated heat demand from an EPC
  • Heat pumps – renewable heat generated by heat pumps will be based on an estimate of the heat demand from an EPC combined with an estimate of the heat pump’s efficiency
  • Solar thermal systems – renewable heat generated by solar thermal systems will be based on the estimate of system performance completed as part of a Microgeneration Certification Scheme (MCS) installation.

Elements affecting payment

  • Once you are receiving Domestic RHI payments, the rate you get will change annually. For new installations, the rates are adjusted every year in line with the Consumer Prices Index (CPI).
  • The RHI scheme uses a ‘degression’ system designed to manage the scheme budget available for the domestic RHI. From time to time, the tariff for a technology will be reduced (for new applicants only) if the total amount being claimed in total for that technology reaches a certain level. Anyone who is already claiming domestic RHI will not have their tariffs reduced through degression.
  • If you have already received a grant from Government or public funds (such as funding via the Energy Company Obligation (ECO) or through Warmer Homes Scotland (WHS)), then the amount received will be taken into account when calculating your domestic RHI payments.


There are two types of metering that you may need on the Domestic RHI scheme: metering for payment and metering for performance.

Metering for payment:
Most domestic systems payments will be based on an estimated heat output (’deeming’) but in some cases, Ofgem may base payments from the metered output. The most common scenarios for this requirement are:

  • You have ‘back-up’ heating or a heating system designed to only partially heat the property
  • The property is occupied for less than half the year

There are other scenarios where metering for payment is a requirement though, and we suggest reviewing Ofgem’s Essential Guide to Metering for a full list.

Metering for performance:

Changes to the domestic RHI mean that heat pumps registering for the scheme from 22 May 2018 must meter for performance. If you are only required to have metering for performance, you will continue you receive payments based on ‘deemed’ heat demand, as determined by your Energy Performance Certificate (EPC) or heat demand limit.

Further details can be found in Ofgem’s factsheets:

Do I need metering for the Domestic Renewable Heat Incentive (RHI)? 

Essential guide to metering

Metering and Monitoring Service Packages (MMSP)

Metering and Monitoring Service Packages are an optional form of monitoring you could choose to provide peace of mind that your renewable heating system is working as expected.

The package works like a service contract between you and your installer, providing data and analysis to check the system is working efficiently.

A limited number of MMSPs are available for air-source heat pumps, ground-source heat pumps and biomass pellet boilers only. Applicants that successfully register for an MMSP will be paid additional support to help cover the cost of installing and operating the package.

You can register for MMSP when you apply to the domestic RHI scheme or afterwards. If you are successful, you will receive MMSP payments alongside your quarterly RHI payments.

See Ofgem’s Essential Guide to Metering and Monitoring Service Packages (MMSP) for further details including information about eligibility, how to apply and expected payments.

Government Schemes

The Domestic Renewable Heat Incentive – what is it?

Launched by the UK government to help meet its legal commitment to ensure 15% of the UK’s energy comes from renewable energy sources by 2020.

The Renewable Heat Incentive (RHI) is the government scheme that pays people that produce their own heating and hot water using renewable energy sources such as air and ground source heat pumps or solar thermal panels.

Green Homes Grant
A Green Homes Grant – what is it?

Starting on the 30th September 2020, homeowners can sign up for big savings on upgrades to their homes under the government’s £2 billion Green Homes Grant.

The Green Homes Grant scheme will see the government fund up to two-thirds of the cost of home improvements up to £10,000. Those homeowners with low-incomes, including those on certain benefits, are eligible.


Solwat renewable energy frequently asked questions

How much of my house can a Heat Pump actually heat?
Heat pumps come in various sizes and are typically sized to heat ALL of your house and ALL of your hot water.
Do I still need other heating systems to support my heat pumps on very cold days?
No, heat pumps are designed to work with outside air temperatures as low as -20C; one of the most popular places where heat pumps are used is Norway and Sweden.
How much does it cost to run a heat pump?
Heat pumps are typically cheaper to run than a gas boiler, and usually significantly cheaper than oil, LPG or Electric heating. This is because of their high efficiency of between 250% to 400%.
Will I still have plenty of hot water/power showers?
Your hot water requirements for showers or anything else will depend more on selecting the right size of hot water cylinder to ensure there is sufficient volume of water available.
Are heat pumps noisy?
No more than a fridge. They have sound levels of typically 45dB to 55dB, which means that even a unit located under the window sill of a modern house with the window closed, is unlikely to be heard by the occupants.
How reliable are heat pumps?
They are based on the same technology that runs fridges and air conditioning units which typically means you can expect them to work for 20 – 25yrs with little maintenance requirements.
What is the guarantee on heat pumps?
Typically 3 years, but in some cases this can be 5 years with an option to extend to 7 years.
How do I get a grant or payment for using renewables?
You need to buy an MCS approved renewable product – you can view a list on the MCS website, and have the product installed by an accredited MCS installer. Once completed the installer will register your installation with MCS and obtain an MCS certificate which they will pass to you. With this certificate, plus a valid EPC you can apply online for your incentive payments.

Ready to get started?